Kyocera EcoPro EP C170N User Manual page 80

Using the Operator Panel
2-54
after another as follows: DataS001 (first data), DataS002 (second data),
DataS003 (third data)...
The write information page includes the following items:
Item
Partition Type
Partition Name
Write Partition Length
Others
When the memory card write information page is printed, the display
returns to Ready.
9 Repeat above steps until you have transferred all data (files) that you want
to write to the memory card. Each time you finish writing data, a memory
card write information page is printed from the printer showing the
information, but pertaining only to the data just written. To see all data
contained in the memory card at once, print a list of data names as
explained. See Printing a List of Data Names (Partitions) on page 2-56.
Deleting Data
It is possible to use the printer to delete data from a memory card.
Check that the memory card contains data. Otherwise, the >Delete
Data menu will not appear on the message display.
1 Press [MENU].
2
Press or
Card > appears.
3 Press .
Type of data written (currently only type 2 is supported).
The destination name of data written to the card.
The size of the written data on the memory card.
Error information.
repeatedly until Memory
Description
Memory Card
ADVANCED OPERATION GUIDE
>