Kyocera EcoPro EP C170N User Manual page 53

ADVANCED OPERATION GUIDE
9 When the desired size is displayed, press [OK] ([ENTER]).
10 Press [MENU]. The display returns to Ready.
Maximum Space Assigned to Permanent Code Jobs
This changes the hard disk space that holds permanent code jobs. You
can change the maximum space from 0 to 9999 (megabytes). The actual
maximum size depends on the size of free hard disk space. The default
size is 1/6 of the total hard disk space, rounded off in units of 50MB. For
example, if the total hard disk space is 10GB, the default size is 1550MB.
1
Press [MENU].
2 Press or
3 Press .
4 Press or
Configuration >.
5 Press .
6 Press or
JOB Size.
7 Press [OK] ([ENTER]), the message
display shows a blinking cursor (_).
8 Press or
blinking cursor. Use
9
When the desired size is displayed, press [OK] ([ENTER]).
10
Press [MENU] and the display returns to Ready.
Maximum Space Assigned to Virtual Mailboxes (VMB)
This changes the hard disk space for virtual mailboxes. You can change
the maximum space from 0 to 9999 (megabytes). The actual maximum
size depends on the size of free hard disk space. The default size is 1/6 of
the total hard disk space, rounded off in units of 50MB. For example, if the
total hard disk space is 10GB, the default size is 1550MB.
and select e-MPS >.
and select >e-MPS
and select >>Perm. Code
to increase or decrease, respectively, the value at the
and to move the cursor right and left.
Using the Operator Panel
e-MPS >
>e-MPS >
Configuration
>>Perm. Code JOB
Size 1550MB
>>Perm. Code JOB
Size 1550MB
2-27