Kyocera EcoPro EP C170N User Manual page 99

ADVANCED OPERATION GUIDE
2 Press or repeatedly until Paper
Handling > appears.
3 Press .
4 Press or repeatedly until >Stack
Select appears.
5 To change the output stack, press [OK]
([ENTER]). A blinking question mark (?)
appears.
6 Press or select output stack - Top tray FaceDn or Rear tray
FaceUp.
7
When the desired output stack is displayed, press [OK] ([ENTER]).
Using the Operator Panel
Paper Handling >
>Stack Select
Top tray FaceDn
>Stack Select
?Top tray FaceDn
2-73