Kyocera EcoPro EP C170N User Manual page 139

ADVANCED OPERATION GUIDE
With Windows 95/98/Me, make settings as follows:
1 Click on the Start button in the Windows 95/98/Me task bar and align the
cursor with Settings, then click on Control Panel from among the items
displayed.
2
The Control Panel window opens. Double click on System.
3
System Properties window opens. Click on the Device Manager tab,
then double click on Ports (COM & LPT).
4 Double click on Communications Port.
5 The Communications Port Properties dialog is displayed for the
selected COM port. Click on the Port Settings tab and set the port
properties.
6
After setting the properties, click the OK button.
The software settings made using the above procedures are temporary.
On most computers, permanent settings must be made with DIP switches.
Computer Interface
4-11