Table of Contents
Advertisement
Chapter 4 Clock sources
4.1
4.2
R20UT3282ED0101 Rev. 1.1
2015-06-10
One external crystal oscillator for the device clock supply is provided with the
board.
MainOsc
A crystal or ceramic resonator can be mounted on socket X1.
A 16Mhz oscillator is supplied with the board.
Programmable Oscillator
It is possible to mount a programmable crystal oscillator on the PiggyBack board
at OSC1. The available footprint and circuitry is designed for a SG-8002CE
programmable crystal oscillator from Epson Toyocom. The output from this
oscillator can be connected to port X1 of the device via jumper JP13. The SG-
8002CE is neither mounted nor provided with the board. For details about the
available circuitry refer to Chapter 10 'Schematic'. A resonator mounted on
socket X1 must not be used in parallel to another clock source.
9
Advertisement
Table of Contents
