Table of Contents
Advertisement
Chapter 8 Precautions
8.1
R20UT3282ED0101 Rev. 1.1
2015-06-10
Missing function of signalling LEDs 1 and 2
Description
The connection from device pins CVMOUTZ and ERROROUTZ to LED1 and
LED2, respectively, is missing on the PiggyBack board. Due to this the LED1 and
LED2 have no function.
Workaround
The picture below shows the required modifications:
The two missing connections can be realized by soldering two cables on the
bottom side of the board.
17
Advertisement
Table of Contents
