Stratasys J826
Compressed Air
Compressed air is useful for routine cleaning and maintenance activities. If a compressed air line is
available at the site, it is recommended (but not required) that an outlet be installed near the printer.
Fire Safety Equipment
A gas-based fire extinguisher is recommended in case of fire in or near the system. Some other fire
extinguishers are also acceptable, but liquid fire extinguishers should not be used. Contact local fire
authorities for specific recommendations.
©
DOC-18005 Rev. E
Note:
If the compressed air line does not include an air-dryer unit, a water/oil trap must be
installed on the air gun used for cleaning the printer. The recommended air pressure is
5-7 bar (70-90 PSI).
2019-2020 Stratasys. All rights reserved.
Accessories and Utilities
18