Table of Contents
Advertisement
RXi HMI User Manual
GFK-3231A
4.
Figure 77: Proceed with Upgrade of the WebHMI Project
5.
Figure 78: Copy Done
6. In a few seconds, a WebHMI screen will appear in the chrome browser in full-screen mode.
Figure 79: Exit Application
7. The restore/ upgrade operation will start when the removable media files have finished
8. The WebHMI will not start until the restore/ upgrade process is completed.
RXi HMI IO Utilities
The user will see the prompt to proceed with the upgrade of the WebHMI project. Click the
Yes button to proceed.
Once the project files are copied from removable media to RXi HMI, the user will see a Copy
Done message (Figure 78).
Once the Chrome browser is launched, it can take up to one minute for the WebHMI screen to
load completely.
Note: While the project files are copying, if the user tries to close the dialog box, it prompts
the below message (Figure 79) to the user. If the user clicks Yes it will stop the copying
operation. If the user clicks on No, the project files will continue to copy.
copying using the transfer project instructions.
Section 5
Jan 2022
55
Advertisement
Table of Contents
