Emerson RXi HMI User Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Measuring Instruments
  5. RXi HMI
  6. User manual

Emerson RXi HMI User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RXi HMI User Manual
GFK-3231A
Jan 2022
RXi HMI
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Emerson RXi HMI

Summary of Contents for Emerson RXi HMI

  • Page 1 RXi HMI User Manual GFK-3231A Jan 2022 RXi HMI USER MANUAL...

  • Page 2: Table Of Contents

    Section 4: Movicon WebHMI Configuration ......8 Movicon WebHMI Configuration ................. 8 4.1.1 Deploying Movicon WebHMI projects in RXi HMI ........8 4.1.2 Deploy Project Window ................17 4.1.3 Profilo Info ....................18 4.1.4 Self-Signed Certificate Generation Steps ..........21 4.1.5 Restore Last Open Screen and Zoom ............
  • Page 3 7.5.2 Scenario 2: Windows File System Corrupted ........... 70 Obtaining License Files ..................70 Section 8: Accessing the BIOS ..........71 BIOS Settings ..................... 71 8.1.1 Accessing the BIOS (RXi HMI) ..............71 Section 9: Mounting Information .........87 Panel Mount ...................... 87 9.1.1 Panel Cutout Dimensions ................ 87 9.1.2 Installation Steps ..................
  • Page 4 10.7 LVDS LCD Panel Connector ................98 10.7.1 BIOS Setting .................... 98 10.8 Audio ........................ 98 10.8.1 Rear Audio ....................98 10.9 Battery ......................99 Appendix A Open Source Software Used by RXi HMI ....100 General Contact Information ..........101 Technical Support ..............101 Contents...
  • Page 5 Changes, modifications, and/or improvements to equipment and specifications are made periodically and these changes may or may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the equipment referenced herein or to the document itself at any time. This document is intended for trained personnel familiar with the Emerson products referenced herein.

  • Page 6: Introduction

    Section 1: Introduction The RXi HMI is an operator interface ready for local and machine visualization needs. Powered by Movicon.NExT WebHMI software, the RXi HMI offers intuitive 2D and 3D graphics, multi-touch gesture support, and historical trending. It supports a wide variety of OT protocols, OPC UA and MQTT for remote connectivity, and supports HTML5 for remote visualization.

  • Page 7: Hardware Specification

    RXi HMI User Manual Section 1 GFK-3231A Jan 2022 Section 2: Hardware Specification RXi HMI Display Size 12" 15" 19" 24" 1280 x Resolution 1920 x 1080 Full HD 800 WXGA Format Widescreen (16:10) Widescreen (16:9) Orientation Landscape 170 (H) / Reading Angle (°)
  • Page 8 RXi HMI User Manual Section 1 GFK-3231A Jan 2022 Display Size 12" 15" 19" 24" 4 x 10/100/1000 Port 1 Base T Ethernet RJ45 1 x RS-232 COM Port (5-Pin Connector, Isolated, use 24-16AWG (0.2- 1.3mm²), strip-length 10mm) Port 2 1 x RS-485 COM Port (5-Pin Connector, Isolated, use 24-16AWG (0.2-...
  • Page 9 RXi HMI User Manual Section 1 GFK-3231A Jan 2022 Display Size 12" 15" 19" 24" UL and cUL Information Technology Equipment (UL/CSA 62368-1) UL and cUL Class 1 Division 2: Programmable Controllers for Use in Hazardous Locations (UL/CSA 61010-2-201, UL 121201, CSA C22.2 No. 213) IECEx &...

  • Page 10: Rxi Hmi Motherboard Specifications

    RXi HMI User Manual Section 1 GFK-3231A Jan 2022 RXi HMI Motherboard Specifications Item Description Board Size 170mm x 113mm AMD® Embedded G-Series CPU Support AMD® GX-412GC, Quad-Core, 2M Cache, 1.2GHz, 15W 4GB DDR3L (Soldered with ECC, -40°C ~ 85°C)

  • Page 11: Rxi Hmi Windows Activation

    Section 3 GFK-3231A Jan 2022 Section 3: RXi HMI Windows Activation The preloaded Windows 10 IOT Enterprise image on RXi HMI is activated by Default. The product key is embedded with the Windows. By default, the user must enable each device for activation.
  • Page 12 RXi HMI User Manual Section 3 GFK-3231A Jan 2022 Not Activated State: If the device connects to the Internet and the activation attempt fails due to an invalid licensing key or one that has exceeded its activation allotment, it will enter a Not Activated state.

  • Page 13: Movicon Webhmi Configuration

    4.1.1 Deploying Movicon WebHMI projects in RXi HMI This topic shows you how to transfer the project to an RXi HMI. The steps to deploy the project correctly are: 1. Launch the Movicon.NExT 4.1 editors from the desktop shortcut or the Start Menu.
  • Page 14 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 This property setting is particularly useful when: • planning to develop a project that includes only those functions supported by WebHMI, • needing to verify the compatibility of a previously developed project with WebHMI visualization.
  • Page 15 Figure 8: Run Server Remotely 7. The Deploy Project window allows you to deploy the project on the RXi HMI along with the I/O Data Server and Web Server which are needed to run the WebHMI locally on the HMI.
  • Page 16 Signed Certificate Generation Steps. Figure 10: Error Validation 9. The user will be prompted to deploy the I/O Data Server if not found on the RXi HMI as shown below. Click Yes to start uploading the I/O Data Server to RXi HMI.
  • Page 17 Figure 13: Deploy Project 11. The user will be prompted to deploy the current project as shown below. Click Yes to start deploying the current project to RXi HMI. Figure 14: Deploy Current Project on Target Machine Note : If the project is already deployed and the user is trying to download a different project, then the user will be prompted to replace the current project as shown in Figure 15.
  • Page 18 13. Start all the enabled servers (Figure 17). Figure 17: Start Servers 14. The Movicon WebHMI project can be opened as below on the RXi HMI. The project is deployed by the integrated Web Server on ports 5000 (HTTP) and 5001 (HTTPS). The default configuration requires that the request received on port 5000 be automatically redirected to port 5001.
  • Page 19 When the user restarts the RXi HMI after deploying the WebHMI, a dialog will appear with the message Loading WebHMI, this could take about 60 seconds, as shown in Figure 19. The user can click on the OK button to close this dialog, or it will be closed automatically after 60 seconds.
  • Page 20 This is shown when the valid certificate is not installed. The user needs to click on Proceed to <IP address of RXi HMI or localhost> (unsafe) to start loading the Movicon WebHMI.
  • Page 21 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 Figure 21: Untrusted Certificate The user needs to create a self-signed certificate. The steps are available in Section 4.1.4, Self- Signed Certificate Generation Steps. The Movicon WebHMI project can also be launched directly by Clicking on the MoviconWeb HMI icon on the desktop to open the webHMI Project.

  • Page 22: Deploy Project Window

    RXi HMI User Manual Section 4 GFK-3231A Jan 2022 4.1.2 Deploy Project Window The Deploy Project window allows the user to deploy the project on the HMI along with the I/O Data Server and Web Server which are needed to run the WebHMI locally on the HMI.

  • Page 23: Profilo Info

    Profile name: The profile name is a unique identifier used by the developer to distinguish the various profiles. User: The username is used to connect to the RXi HMI's Deploy Server. Password: The password is used to connect to the RXi HMI's Deploy Server.
  • Page 24 Advanced Server Startup: allows the execution of each Runtime component to be started up or stopped. • Remote License Info > Check Remote License: displays the RXi HMI's active license options and Site Code • Remote License Info > Install Remote License: this allows the software license to be installed on the remote HMI.
  • Page 25 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 Upload Info This section reports the progress of the transfer in progress. Figure 26: Upload Info Remote Device Info This section shows the information on the remote device's processes and operating system.

  • Page 26: Self-Signed Certificate Generation Steps

    GFK-3231A Jan 2022 4.1.4 Self-Signed Certificate Generation Steps 1. Open a PowerShell window in administrator mode on the RXi HMI device and run the following command: New-SelfSignedCertificate -NotBefore (Get-Date) -NotAfter (Get-Date).AddYears(1) -Subject "DESKTOP-HSCFREB" -KeyAlgorithm "RSA" -KeyLength 2048 -HashAlgorithm "SHA256" - CertStoreLocation "Cert:\CurrentUser\My"...
  • Page 27 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 3. Right-click on the DESKTOP-HSCFREB certificate and choose Copy. 4. Select the Trusted Root Certificate Authorities -> Certificates and right-click paste as shown in Figure 1. You will be prompted with a security warning as shown in Figure 30.
  • Page 28 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 5. Follow the screenshots below to export the certificate into a *.pfx using the export wizard. Figure 32: Export Wizard 6. Follow the Export Wizard prompts. Figure 33: Certificate Export Wizard...
  • Page 29 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 7. Export the Private Key. Figure 34: Export Key 8. Select Personal Information Exchange. Figure 35: Certificate Export Wizard Movicon/NExT Web HMI Configuration...
  • Page 30 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 9. Create and confirm the new password. Figure 36: Credentials 10. Browse for the Personal Information Exchange File (PFX). The file path is Users\Public\Documentation\Progea Figure 37: .PFX File Movicon/NExT Web HMI Configuration...
  • Page 31 Note: In these parts, you need to change the path and the password with the data that you have used for export the certificate. 17. Restart the RXi HMI device. Note: In this case locally you can connect without any warnings about the certificate. If you want to connect also using a remote computer, you MUST trust the certificate also in the remote machine on Local Computer ->...

  • Page 32: Restore Last Open Screen And Zoom

    Notes : 1. The Zoom scenario will not work when the zoom functionality is applied with the touch screen on the RXi HMI device. 2. To properly configure the zoom functionality, apply the zoom feature with a mouse (using the Ctrl button and mouse scroll wheel) or use the Chrome settings zoom value.

  • Page 33: Supported Drivers For Movicon Webhmi

    RXi HMI User Manual Section 4 GFK-3231A Jan 2022 4.1.7 Supported Drivers for Movicon WebHMI Manufacturer Protocol Requirements Package 3S Software CODESYS CODESYS Automation SoftPLC version Beckhoff Beckhoff Automation Beckhoff TwinCAT TwinCAT ADS system B&R devices that implement Automation B&R B&R...
  • Page 34 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 Manufacturer Protocol Requirements Package Omron NJ, NX Omron EtherNet/IP Automation PLCs Omron SYSMAC Omron Fins Ethernet Automation PLCs PLC NAIS FP Panasonic Automation MEWTOCOL Series PLC-5, SLC-500, MicroLogix, Rockwell Allen Bradley...
  • Page 35 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 Manufacturer Protocol Requirements Package OPC UA All OPC UA Foundation- Basic Client Server Progea SQL Driver is able to connect SQL Driver to a database Progea Basic server that supports the TCP/IP protocol.

  • Page 36: Licensing

    This section describes the licensing of Movicon WebHMI running on RXi HMI. Movicon WebHMI Runtime license will be activated by default on the RXi HMI device. Movicon WebHMI license Locking occurs during image deployment at the Factory. License Daemon checks and identifies HW and gets product SKU from the License file.
  • Page 37 RXi HMI User Manual Section 4 GFK-3231A Jan 2022 Figure 43: License Validated Movicon/NExT Web HMI Configuration...

  • Page 38: Checking Movicon Webhmi Runtime License

    RXi HMI User Manual Section 4 GFK-3231A Jan 2022 4.2.2 Checking Movicon WebHMI Runtime License 1. Click the Options menu from the toolbar and select the Deploy WebHMI Project to check the Movicon WebHMI Runtime License. Figure 44: Deploy WebHMI Project 2.
  • Page 39 Figure 46: Confirm Running on Target Machine 4. Navigate to the Remote License Info section in Deploy Project Window and click the Check Remote License option to check the Movicon WebHMI Runtime License on RXi HMI. Figure 47: Check Remote License...
  • Page 40 Section 4 GFK-3231A Jan 2022 5. Fetch the License information from RXi HMI and display window to the user as shown in Figure Figure 48: License Found Note: Browse to the Path C:\Users\Public\Documents\Progea\DeployServer.NExT 4.1\Projects\<Project Name>\Log. Open the System Log and check for the string You're running in demo mode.

  • Page 41: Rxi Hmi Oi Utilities

    Figure 49 or from the Start menu as shown in Figure 50. Figure 49: Desktop Icon Figure 50: Start Menu Icon Note: Once the user clicks the RXi HMI OI Utilities then the UAC dialog will be prompted as shown in Figure 51. S Click Yes to launch the application.
  • Page 42 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 RXi HMI IO Utilities...

  • Page 43: Launch Application

    Figure 51: UAC Promt Launch Application Launch Application contains frequently RXi HMI applications. The user needs to click on the icon to launch the application. An application like Screen Sensitivity, Task Manager, Device Manager, Remote Desktop, VNC Server, Reboot to reboot the RXi HMI device, Control Panel, Date-Time, Taskbar, Admin Tools, PacsAnalyzer, Notepad, File Options, Volume Settings, Network.

  • Page 44: Settings

    RXi HMI at a later time, or, if needed, also on a different RXi HMI. Figure 53: RXi HMI Settings - System Tab...
  • Page 45 GFK-3231A Jan 2022 Figure 54: RXi HMI Settings - Registry Tab To update the value to a registry key, the user needs to click on the Update button which is shown in Figure 55. This figure will provide the user the values necessary for the Key Path, Name, Type, and Data.

  • Page 46: Import Registry Data From Xml File

    RXi HMI User Manual Section 5 GFK-3231A Jan 2022 5.2.1 Import Registry Data from XML File An alternate method to input the data to the registry is by using the Import option where the registry value data is available in an XML file and then imported using the Import option in the dialog.

  • Page 47: Save The Settings To A File

    RXi HMI User Manual Section 5 GFK-3231A Jan 2022 5.2.2 Save the Settings to a File To save the settings and registry values to a file, click on the Save button. It displays the file save dialog, allowing the user to select the folder location and provide the file name. Click the OK button which is shown in Figure 59 to complete the creation and saving of data to the file.

  • Page 48: Restore The Settings From A (.Rbs) File

    Open button which is shown in Figure 62. 4. Once the .rbs file is restored then It will ask to restart the RXi HMI to apply the settings on the device which is shown in Figure 63.

  • Page 49: Setup

    Jan 2022 Figure 63: Settings Restored Notification Setup The Setup page under RXi HMI IO Utilities allows the user to configure settings on the RXi HMI. It contains various tabs which will provide multiple operations on RXi HMI. • Backlight – It allows to configure the backlight/brightness.

  • Page 50: Backlight Tab

    RXi HMI User Manual Section 5 GFK-3231A Jan 2022 5.3.1 Backlight Tab Backlight Adjustment 1. Select the Backlight tab to configure the backlight. 2. The user can enable the Automatically Turn off Backlight in and specify an amount of time.
  • Page 51 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 Brightness Adjustment 1. Select the Backlight tab to configure the brightness. 2. The user can adjust the brightness using the slider. The leftmost slider movement is set to low brightness and the rightmost slider movement is set to higher brightness. The value varies from 0 to 100.

  • Page 52: Display Tab

    Rotation. • degree Rotation. Figure 66: Screen Rotation Note: Display Screen Rotation cannot be changed when RXi HMI Device is connected through Remote Desktop. CAUTION Although Emerson recommends the use of the protective sheet, do not operate the touchscreen with any hard materials, such as a screwdriver.
  • Page 53 Information Services\World Wide Web Services. Check all checkboxes that apply. Note: If the user checked the FTP Server then we can see that the FTP service is running on RXi HMI. Note: If the server status is changed, the RXi HMI must be restarted before changes take effect.

  • Page 54: Sntp Tab

    SNTP tab to update the RXi HMI system time. The SNTP server included with the RXi HMI supports SNTP Version 4 for IPv4, IPv6, and OSI. By default, the server is not enabled. The SNTP server supports non-secure UDP port 123 operations.

  • Page 55: Transfer Projects

    GFK-3231A Jan 2022 Transfer Projects The Transfer Projects Page will allow the user to perform multiple operations on RXi HMI which are listed below: 1. Copy Project: This operation copies the projects of RXi HMI to Removable Media transfers using SD cards.
  • Page 56 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 5. After the user selects specific media (drive) or the default media (when only a single removable drive is available), the system will request the user’s profile credentials (project deployment credentials) (Figure 69).
  • Page 57 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 7. Once the user clicks on the Yes button, the projects will be copied to removable media as shown in Figure 71. Figure 71: Copy Project Status 8. The status dialog box sill prompt a Copy Done message once projects are copied to the removable media (Figure 72).
  • Page 58 GFK-3231A Jan 2022 Note: After selecting the Transfer Projects tree item, if RXi HMI cannot find the Removable Media, then the user will be prompted with the below message (Figure 73). Figure 73: No Removable Media While the project files are copying, if the user tries to close the dialog box, it prompts the below message (Figure 74) to the user.

  • Page 59: Restore Project From Removable Media

    Figure 75: RestorePCCard 3. The user will now see the drive selection screen as shown in Figure 76. Note: If there are only one removable media in the RXi HMI, the hardware will default to the mounted drive. Figure 76: Select Media...
  • Page 60 The user will see the prompt to proceed with the upgrade of the WebHMI project. Click the Yes button to proceed. Figure 77: Proceed with Upgrade of the WebHMI Project Once the project files are copied from removable media to RXi HMI, the user will see a Copy Done message (Figure 78). Figure 78: Copy Done 6.

  • Page 61: Auto Logon

    GFK-3231A Jan 2022 Auto Logon Users can configure the RXi HMI for auto logon. To enable/disable the feature: 1. Launch RXi HMI OI Utilities. 2. Select Yes on UAC prompt dialog. 3. Navigate to the Auto Logon page under RXi HMI OI Utilities.

  • Page 62: System Information

    GFK-3231A Jan 2022 System Information System Information tool provides you the important system configuration of RXi HMI and saves the system configuration into the System log file. 1. Launch the RXi HMI OI Utilities. Select Yes on UAC prompt dialog.

  • Page 63: Movicon Webhmi

    Movicon WebHMI helps the user to launch deployed WebHMI Project. This page provides the details about the installed Movicon WebHMI version and deployed project name. 1. Launch RXi HMI OI Utilities. Select Yes on UAC prompt dialog. 2. Navigate to the Movicon WebHMI page under RXi HMI OI Utilities.
  • Page 64 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 RXi HMI IO Utilities...

  • Page 65: Change Webhmi Password

    Admin@123. 1. Launch RXi HMI OI Utilities. Select Yes on UAC prompt dialog. 2. Navigate to the Change WebHMI Password page under RXi HMI OI Utilities. 3. Enter the user and old Password. 4. Enter the New Password and Confirm Password 5.
  • Page 66 RXi HMI User Manual Section 5 GFK-3231A Jan 2022 Figure 87: Error Message Figure 88: Success Message RXi HMI IO Utilities...

  • Page 67: Remote Connection

    Connect. VNC Client The user can use any VNC client software to connect the RXi HMI. To do so the user needs to start the VNC server on the RXi HMI device. VNC Server can be launched with the following steps: 1.
  • Page 68 Jan 2022 Note: 1. The remote connection to RXi HMI cannot be done if the device is in sleep mode. The user needs to awake the RXi HMI or set the Sleep to Never as shown below. Figure 90: Sleep Configuration 2.

  • Page 69: Image Recovery

    Image Recovery Solution (RCV) can be used to restore/reset a Windows installation on a unit initially delivered with a preloaded Windows image that is not able to boot any longer. This can also be used to upgrade to the new Major version of RXi HMI. Create a Bootable USB Flash Device This outlines the steps necessary to create a bootable USB flash device and copy Windows PE for Windows image deployment to it.
  • Page 70 RXi HMI User Manual Section 7 GFK-3231A Jan 2022 5. Erase your USB stick. Figure 93: Erase Disk 6. Enter list disk to verify the free space on your disk. Figure 94: Verify Disk Free Space 7. Enter create a partition primary to create a primary partition.
  • Page 71 RXi HMI User Manual Section 7 GFK-3231A Jan 2022 9. Issue command format fs=fat32 label=RecoveryUSB quick to format the selected volume/partition. Note that specifying a label for the partition is optional but recommended. Also, note that specifying the "quick" option can be used for quick format.

  • Page 72: Copy The Windows Pe Image

    RXi HMI User Manual Section 7 GFK-3231A Jan 2022 12. Check the assignation with the list vol command. Figure 100: Verify the Drive Letter Assignation 13. Enter Exit to exit the diskpart. Figure 101: Exit Drive Partition Copy the Windows PE Image 1.
  • Page 73 RXi HMI User Manual Section 7 GFK-3231A Jan 2022 Figure 103: Contents Copied Successfully 2. Copy the Recovery Image(s) (RXi_Win10_2019_ HMI_rxxx.swm to the images folder. These are typically .swm-files or a .wim-file. 3. Eject and remove the WinPE USB stick just created.

  • Page 74: Install The Windows 10 Recovery/Upgrade Image

    Device. Use a USB Stick that is between 8 and 32 GB in size. 2. Insert the bootable USB Flash Device into the RXi HMI. 3. Power on the RXi HMI and enter the UEFI setup by pressing F2 or Del right after the keyboard LEDs are lit.

  • Page 75: Scenario 2: Windows File System Corrupted

    Hardware unit. Please contact technical support for License files after Image Recovery. Once the recovery/upgrade image is installed on RXi HMI then once again error Message will be shown to the user: License.json and License.sig files couldn't be restored to the Hardware unit.

  • Page 76: Accessing The Bios

    BIOS Settings 8.1.1 Accessing the BIOS (RXi HMI) The BIOS is a program that handles basic levels of communication between the CPU and peripherals. It contains codes for various advanced features found in this system board. The BIOS allows you to configure the system and save the configuration in a battery-backed CMOS so that the data is retained even when the power is off.
  • Page 77 To display the submenu, move the highlight to that field and press Enter. AMI BIOS Setup Utility (RXi HMI) Accessing the BIOS To access the BIOS, you must attach a USB keyboard to the device and repeatedly press the Delete key during the startup sequence until it brings you to the BIOS Main Menu.
  • Page 78 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others if enabled, will improve the performance of your system or allow the user to set some features according to their preference.
  • Page 79 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Trusted Computing This section is used to configure the Trusted Computing settings. Figure 108: Trusted Computing BIOS Parameter Description Enable or disable BIOS support for a security device. The Operating System will not show a security device. TCG EFI Security Device Support protocol and INT1A interface will not be available.
  • Page 80 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Wakeup Configuration This section is used to configure the Wakeup ACPI Power Management. Figure 109: Wakeup Configuration BIOS Parameter Description Resume by PME Enable or disable to resume by PME (PCI, PCIe, LAN, etc.) This is enabled by default.
  • Page 81 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 CPU Configuration This section is used to configure the CPU. It will also display the detected CPU information. Figure 110: CPU Configuration BIOS Parameter Description Enable or disable CPU Virtualization. SVM Mode...
  • Page 82 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 IDE Configuration This section is used to configure the IDE Devices. It will also display the detected information. Figure 111: IDE Configuration USB Configuration This section is used to configure the parameters of the USB Device.
  • Page 83 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 NCT61120 Super IO Configuration This section is used to configure the parameters of the system super IO chip. BIOS Parameter Description Enable or disable the serial COM port. Serial Port Enable or disable the RS485 auto flow support.
  • Page 84 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 NCT 6112D Super IO Features This section is used to configure some control functions of the system super IO chip. Figure 114: NCT 6112D Super IO Features BIOS Parameter Description A WatchDog timer (WDT) is a hardware timer that automatically generates a system reset if the main program neglects to periodically service it.
  • Page 85 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Network Stack Configuration This section is used to enable or disable network stack settings. The Network Stack Controls LAN1 & LAN2 (Also LAN 3 & LAN4 on large computing module). Figure 115: Network Stack Configuration...
  • Page 86 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Chipset This section configures relevant chipset functions. Figure 116: Chipset Screen BIOS Parameter Description OnChip SATA Channel Enable or disable Serial ATA OnChip SATA Type Select OnChip SATA Type: Native IDE, AHCI, or Legacy IDE.
  • Page 87 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Boot Configuration Figure 117: Boot Configuration Menu BIOS Parameter Description Select the number of seconds to wait for the setup activation Setup Prompt Timeout key. 65535(0xFFFF) denotes indefinite waiting. This allows you to determine the default state of the numeric keypad.
  • Page 88 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Hard Drive BBS Priorities Set the order of the legacy devices in this group. Figure 118: Hard Drive BIOS Boot Specification BIOS Parameter Description Launch CSM This field is used to enable or disable to launch of CSM.
  • Page 89 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Security Figure 119: Security BIOS Parameter Description Administrator Password Set the administrator password. User Password Set the user password. This section is used to configure customizable secure boot Secure Boot Menu settings.
  • Page 90 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Key Management This section enables experienced users to modify secure boot variables. Figure 120: Key Management BIOS Parameter Description Enable or disable to install factory default secure boot keys when the system is in Default Key setup mode.
  • Page 91 RXi HMI User Manual Section 8 GFK-3231A Jan 2022 Save & Exit Menu Options Figure 121: Menu Options BIOS Parameter Description To save the changes, select this field and then press Enter. A Save Changes and Reset dialog box will appear. Select Yes to reset the system after saving all changes made.

  • Page 92: Mounting Information

    Section 9 GFK-3231A Jan 2022 Section 9: Mounting Information Panel Mount The RXi HMI can be panel-mounted. Panel Thickness: 16 to 7 gauge (1.6 to 5 mm) Panel Thickness: 1.6 to 5mm All measurements within ±0.5mm 9.1.1 Panel Cutout Dimensions...

  • Page 93: Installation Steps

    Installation Steps 1. Verify that the gasket is present and properly seated in the bezel channel located on the sides of the unit. 2. Carefully insert the RXi HMI into the mounting panel cutout. Figure 123: Panel Install View Mounting Information...
  • Page 94 RXi HMI User Manual Section 9 GFK-3231A Jan 2022 3. Insert the hook of the mounting bracket into the mounting hole as displayed in the following figure. Figure 124: Mounting Bracket Insertion 4. Tighten all mounting brackets by hand until the gasket seal contacts the mounting surface uniformly.

  • Page 95: Mounting To Modular Display

    RXi HMI User Manual Section 9 GFK-3231A Jan 2022 Mounting to Modular Display Figure 126: 12" Mount Mounting Information...
  • Page 96 RXi HMI User Manual Section 9 GFK-3231A Jan 2022 Figure 127: 15" Mount Mounting Information...
  • Page 97 RXi HMI User Manual Section 9 GFK-3231A Jan 2022 Figure 128: 19/24" Mount Mounting Information...

  • Page 98: Vesa Mount

    9.3.1 VESA Mount Dimensions The RXi HMI can also be VESA mounted as shown in the figures below. All 12” through 24” units include VESA Mount Dimensions of 100 mm x 100 mm. All units are fastened with four M4x8 screws.
  • Page 99 RXi HMI User Manual Section 9 GFK-3231A Jan 2022 Figure 130: 15" VESA Mount Mounting Information...
  • Page 100 RXi HMI User Manual Section 9 GFK-3231A Jan 2022 Figure 131: 19"/24" VESA Mount Mounting Information...

  • Page 101: Section 10: Physical Connections And Configuration Settings

    10.2 Ethernet Ports The RXi HMI has Four Base-T Ethernet Ports. Use the LAN ports to connect to a local area network through a network hub or router. If additional configuration is required, visit the Wakeup Configuration menu in the device BIOS on startup.

  • Page 102: Operation Status Leds (Screen)

    RXi HMI User Manual Section 10 GFK-3231A Jan 2022 10.2.2 Operation Status LEDs (Screen) RXi HMI has a tri-color LED built into the screen that provides a visual indication of the operation status. LED State System State Amber, Solid Operating system starting...

  • Page 103: I/O Connectors

    RXi HMI User Manual Section 10 GFK-3231A Jan 2022 10.5 I/O Connectors 10.5.1 Serial ATA (SATA) Connector Features 1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s Integrated Advanced Host Controller Interface (AHCI) controller The Serial ATA connector is used to connect the Serial ATA device. Connect one end of the Serial ATA data connector to a SATA connector on the other end to your Serial ATA device.

  • Page 104: Battery

    RXi HMI User Manual Section 10 GFK-3231A Jan 2022 10.9 Battery The lithium-ion battery powers the real-time clock and CMOS memory. It is an auxiliary source of power when the main power is shut off or disconnected. It is a standard CR2032 battery and is accessible on the bottom of the computing module when separated from the screen (as shown inFigure 132.

  • Page 105: Appendix A Open Source Software Used By Rxi Hmi

    COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Appendix A: Open Source Software Used by RXi HMI...

  • Page 106: General Contact Information

    Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for any support. Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in this manual at any time without notice. Emerson does not assume responsibility for the selection, use, or maintenance of any product.

Table of Contents