Table of Contents
Advertisement
Troubleshooting
during start-up or during a fresh installation of a system. In this
case, the LED of the accessory lights up red. It may be non-re-
sponsive for a short period (max. 1 hour), until the time restric-
tion for transmission has expired. After this period, it will operate
normal again.
7.2
Error codes and flashing sequences
Flashing code
Short orange
flashing
1x long green
lighting
Short orange
flashing (every
10 seconds)
Fast orange
flashing
18
Meaning
Radio transmissi-
on/attempting to
transmit/
data transfer
Transmission con-
firmed
Connection mode
active (connecting
to the DHC Access
Point)
Connection mode
of both accessories
active (connecting)
Solution
Wait until the transmis-
sion is completed.
Continue operation.
Enter the last four
numbers of the device
serial number for
confirmation (see „6.4
Connecting further
DHC accessories" on
page 16).
Wait for confirmation
of the accessory LED.
Advertisement
Table of Contents
Need help?
Do you have a question about the homecontrols EKRSIBDI1V3 and is the answer not in the manual?
Questions and answers