Table of Contents
Advertisement
Flashing code
1x long red
lighting
6x long red
flashing
1x orange
and 1 x green
lighting
8
Restore factory settings
The factory settings of the accessory can be restored. If
you do this, you will lose all your settings.
To restore the factory settings of the accessory, proceed as fol-
lows:
Long press the system button (A) for 4 seconds (see
1.
figure 5).
»
The LED quickly starts flashing orange.
2.
Release the system button again.
3.
Long press the system button again for 4 seconds.
»
The LED lights up green.
4.
Release the system button to finish the procedure.
Meaning
Transmission failed
or duty cycle limit is
reached
Accessory defective Contact your reseller.
Test LED
Restore factory settings
Solution
Try again (see „7.1
Duty cycle" on page
17).
After the test LED
has stopped, you can
continue.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the homecontrols EKRSIBDI1V3 and is the answer not in the manual?
Questions and answers