清潔與更換、調整 Cleaning And Replacement, Adjustment - ?HC HC8813 Maintenance Manual

HO CHIER
6-6 清潔與更換、調整 Cleaning and Replacement, Adjustment
A.工作燈燈泡 Work light bulb.
(1) 欲更換燈泡時，將工作燈背蓋固定螺絲拆下，取下背蓋 .
When you want to change the light bulb, remove the light back cover, fix the
screw and remove the back cover.
(2) 取下燈泡座固定彈簧夾。
Remove the lamp holder fixing spring clip.
(3) 卸下燈泡線端子，取出燈泡。
Remove the lamp wire terminal and the bulb.
(4) 更換新燈泡。(規格：100-240V/9W)
Change to new bulb. (specification: 100-240V/9W).
(5) 安裝時，依照拆下步驟之反順序安裝。
When installing, according in the reverse order of the removal steps.
B.操作面板按鍵燈泡
(1) 取下按鍵蓋。
Remove the button cover.
(2) 逆時針方向，旋轉將按鍵燈泡取出。
Following anti-clockwise direction, rotate the button to remove the bulb.
(3) 更換新燈泡，按照順時針方向將燈泡鎖緊。
Change to new light bulb, and tighten the light bulb following clockwise.
(4) 重新蓋好按鍵蓋。
Cover the button again.
C.LED 顯示燈泡
Display light bulb.
(1) 拆下 操 作 面板 固 定螺 絲， 取 下 操作 面 板。 拆下 操 作 面板 固 定螺 絲，
取下操作面板.
Take apart the control panel, fixing screws and take down control panel.
(2) 準備焊槍插電加熱後，點住焊點，取下 LED 燈泡。
After preparing the welding torch, plug in, heating click and keep on the solder
joint and remove the LED bulb.
Operation panel button bulb.
32