安裝及準備事項 Installation And Preparation; 4-1.準備事項 Preparation - ?HC HC8813 Maintenance Manual

Single end notching machine
Table of Contents

Advertisement

HO CHIER
4.安裝及準備事項 Installation and Preparation
4-1.準備事項 Preparation
只有受過訓練並通過驗證的人員才可以操作堆高機、天車或其他類似功能之設
1.
備,以及處理吊索之安置。
Only trained and certified personnel can operate the forklift, crane or other similar
functions. As long as handle the position of slings.
檢查天車的鋼纜或鏈條是否有疲勞現象,如遇有不良現象,禁止使用。
2.
Check if the cable or chain of the crane is fatigued. If there is any problem, it is forbidden
to use.
請使用本公司建議之吊具,及輔助工具。
3.
Please use our recommended spreaders and auxiliary tools.
機台四周及地面必須保持乾淨。
4.
The machine surrounding and the ground must be kept clean.
機台安放妥當及完成清潔後,請連上正確的電源,並確認相關電力供應及電壓均
5.
正確認無誤。
After properly installing and cleaning the machine, please connect the correct power
Supply and confirm that the relevant power and voltage are correct.
在開始使用機台前,請先用沾有燃料油或石蠟油的碎布去除機台各部的防鏽油,
6.
請不要使用甲苯化合物。
Before using the machine, please use rags with fuel oil or paraffin oil to remove the anti-
rust oil from each part of the machine. Please do not use toluene compound.
17

Advertisement

Table of Contents
loading

Table of Contents