SINGULARITY COMPUTERS Eclipse Series Assembly Manual page 6

system it can fit 2x 360mm radiators 60mm thick with a single set of fans or 2x 360mm
radiators 40mm thick with two sets of fans, and the D5 pump. The PowerBoard can handle the
most high-end PSUs and components.
Radiator Adjustment
•
The radiator mounting panels have a large range of adjustment to help with port alignment to
the distribution plate.
Storage
•
Spectre 3.0 Integra has 7x 2.5" Drive positions. Two are on the top of the PSU shroud, four inside
of the PSU shroud and there is one integrated on the PowerBoard. The two on top of the PSU
shroud cannot be used with vertically mounted GPUs.
Design & Engineering
We are all experienced system builders at Singularity Computers having built high end water-
cooled systems for over 15 years. Our approach to product development begins with a need for
our own builds and so the origin is always function. From there we start to build ideas around this
function and the aesthetics and everything else follows. The original idea for Spectre came from
our years of building highly customized, high end water-cooled systems and trying to reduce the
exceptionally long build times and complexity. Our approach to development is hands on, we are
using our own products every day.
The aesthetics of Spectre originate from its function with one of the main aesthetic features (the
distribution plate lighting) being something only made possible by the integration. We wanted
the case to look skeletal and almost transparent enough to (in a way) disappear around the
components. The metal components have been designed to enhance this with an extreme focus
on detailed and complex multi sided CNC machining.
Manufacturing & Quality
Every component of Spectre is CNC machined from a solid block of material. With the level of
transparency and being an open case, we wanted it to be a celebration of the raw materials. There
is no hidden or back side, and this also goes for the components being installed. Due to this we
selected the most high-end materials manufacturing process. The Distribution Plate is machined
on a CNC router built from thick sheets of cast acrylic. It is hand assembled with silicone gaskets
and stainless-steel fasteners, and pressure tested. The metal components are machined with
Extreme Precision from solid blocks of 6061 aluminum on a CNC mill then sand blasted and
anodized.
Revision 2.2
Spectre 3.0 Integra, Integra Umbra Limited Edition &
Integra Umbra Chrome Elite Limited Edition Assembly Manual
Page | 5