Related Manuals for SINGULARITY COMPUTERS Spectre 3.0
Summary of Contents for SINGULARITY COMPUTERS Spectre 3.0
- Page 1 Spectre 3.0 Integra PowerBoard Manual All PowerBoards need PowerBoard PSU Cables and PowerBoard Linking Cables. Page | 1...
- Page 2 PSU shroud area than stock cables. PowerBoard Linking Cables: Spectre 3.0 Integra comes with a standard kit of PowerBoard Linking Cables which includes 24 x 1, 8pin EPS x2 and 8pin PCIE x3. The pinout of these Linking cables is 1:1 like extensions but the cables are custom to achieve an arch.
- Page 3 Spectre 3.0 Integra PowerBoard Manual ARGB On/Off Switch: This switch connects/disconnects the ARGB control signal from the built-in LEDs on the PowerBoard. When turned ON, the LEDs will immediately light up. When turned OFF, the LEDs will not light up from the next time the system is turned ON from a cold boot but will display the last colour they were displaying before the switch was turned OFF.
- Page 4 PowerBoard inside the acrylic cut out, touch the Singularity Computers logo to turn the system on. Fourth is the power button built into the motherboard, it depends on the model whether it has it or not.
Need help?
Do you have a question about the Spectre 3.0 and is the answer not in the manual?
Questions and answers