Table of Contents
Advertisement
Introduction—Crystal Forest
1.1
Warnings and Cautions
Caution:
Ensure a safe and static-free work environment before removing any components
from their anti-static packaging. The CRB is susceptible to electrostatic discharge,
which may cause failure or unpredictable operation.
Caution:
Connecting the wrong cable or reversing a cable may damage the board and may
damage the device being connected. Since the board is not in a protective chassis, use
caution when connecting cables to the board.
Caution:
The power supply cord is the main disconnect device to the main power (AC power).
The socket outlet should be installed near the equipment and should be readily
accessible. To avoid shock, ensure that the power cord is connected to a properly
wired and grounded receptacle. Do not connect/disconnect any cables or perform
installation/maintenance of the boards during an electrical storm. Ensure that any
equipment to which this CRB will be attached is also connected to properly wired and
grounded receptacles.
Ensure that setting up the power supply is the final step performed in the process of
assembly.
Once the board is set up, plug the power cable into the back of the power supply,
leaving the switch in the OFF position, then plug the cord into the power source and
switch on the power supply.
Caution:
Items marked as "Reserved" in this users guide and in the CRB schematics are not
supported. Changing settings related to these items could lead to unknown behavior
on the CRB.
1.2
Kit Contents
Feature
CRB board
Processor
Processor heatsink
Chipset
Memory
SPI flash
Power supply
Video card
Hard drive
Disk drive
October 2012
Order No.: 328009-001US
PCB assembled with a BGA device down for the Intel
Core™ Processor For Communications Infrastructure and device down for
®
Intel
Communications Chipset 89xx Series with a passive heatsink.
®
®
Intel
Xeon
and Intel
Active heatsink
Intel® Communications Chipset 8910
Two Micron 1-GB DDR3, UDIMMs (ECC) (different DIMM type may be provided)
Two-socketed SPI flash (4 MB each) for BIOS, PCH ME Ignition FW, and
platform data
625 W ATX power supply
x1 PCIe* graphics card
Western Digital 3.5 inch-solid state drive: 160 GB SATA II
LITE ON DVD-RW/CD-RW SATA disk
®
®
Intel
Xeon
Processor E3-1125C with Intel
Description
®
Core™ Processor For Communications Infrastructure
®
Communications Chipset 8910 Development Kit
®
®
®
Xeon
and Intel
continued...
User Guide
7
Advertisement
Table of Contents
