Access Port - Gram BioCompact II Instructions For Use Manual

Access port

All BioCompact ll cabinets are equipped with an access port on the back of the cabinets,
this can be used to easily fit external sensors.
All access ports are constructed in the same fashion, with a conical polystyrene plug (fitted from the back of the cabinet) and a plastic
cap (fitted from the inside of the cabinet).
Please note, it is very important to re-fit the polystyrene plug and plastic cap after mounting sensor, probe etc. Failing to do so can
result in lowered performance or malfunction of the cabinet.
Access ports are clearly marked "Access port" on the cabinet. Find the location on this page.
46