Changing/Deleting A Speed Dial - Konica Minolta PagePro 1390 MF User Manual

5
Type in the fax number of the
recipient.
The fax number can contain
a maximum of 40 digits.
Entering numbers after 40 digits have already been entered for the fax
number will overwrite the number at the cursor's position.
6
Press the [Select] key to register the entered information and return to the
Fax mode screen.
Press the [Stop/Reset] key to return to the Fax mode screen without
registering the entered information.

Changing/Deleting a Speed Dial

The registered speed dial information can be corrected.
1
Press the [Menu] key, the [5] key, and then the [Select] key.
2
Press the [+] key. Check that the
Speed Dial screen appears, and
then press the [Select] key.
3
Type in the 2-digit speed dial number to be corrected.
4
Correct the name of the fax
recipient, and then press the
[Select] key.
To erase the information
from the speed dial, erase the fax recipient's entire name and fax
number.
To cancel the changes to the speed dial, press the [Cancel] key. The
Speed Dial screen appears again.
To correct the entered information, press the [+] or [–] key until the cur-
sor is positioned at the information to be corrected. Then, press the
[–] key to delete a character.
5
Correct the fax number of the
recipient.
6
Press the [Select] key to register
the corrections and return to the Fax mode screen.
Press the [Stop/Reset] key to return to the Fax mode screen without
registering the entered information.
Speed Dial 43