Basic Fax Operation - Konica Minolta PagePro 1390 MF User Manual

Basic Fax Operation

This section contains basic information on sending faxes.
An example of the basic procedure for sending a fax using the ADF is
described below.
1
Press the [Fax] key to enter Fax mode.
2
Load the original document to be faxed facing up.
3
Press the [Brightness] and [Resolution] keys to specify the desired bright-
ness and image quality.
4
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the one-touch dial key
–
Using the Speed Dial function
–
Using the Search function
–
Using the [Redial/Pause] key
5
Press the [Start] key.
The document is scanned, and then the fax is sent.
20
For details on loading the original document into the ADF input
tray, refer to "Loading the Original Document Into the ADF Input
Tray" on page 21.
For details on placing the original document on the flatbed glass,
refer to "Placing the Original Document on the Flatbed Glass" on
page 22.
The brightness of the document can be adjusted by pressing the
[Brightness] key. For details, refer to "Improving Brightness" on
page 24.
The document image quality can be adjusted by pressing the
[Resolution] key. For details, refer to "Improving Resolution" on
page 24.
For details on specifying the recipient, refer to "Specifying a Recip-
ient" on page 25. For details on using the [Redial/Pause] key, refer
to "Sending a Fax Again" on page 29.
If Pulse is selected as the telephone line type, press the [*] key to
temporarily change the line type to Tone. After using the machine
with the receiver on the hook, return the setting to Pulse.
To stop the transmission, press the [Stop/Reset] key.
Basic Fax Operation