Sending Faxes After Using The Telephone; Sending Faxes After Checking To See Whether The Recipient Answers - Konica Minolta PagePro 1390 MF User Manual

Sending Faxes after Using the Telephone

A fax can be sent after finishing a conversation using a telephone connected
to this machine.
1
Load the document into the ADF or place it on the flatbed glass.
2
Pick up the telephone receiver.
3
Type in the fax number of the recipient.
4
After completing the telephone
conversation, press the [Start]
key. A screen appears, allowing
you to select whether to send or
receive a fax.
5
Press the [1] key. The fax transmission begins.
A timer transmission or redialing is paused while the telephone
receiver is off the hook. The fax is not sent even if the transmission
time has been reached. The fax is sent after the telephone receiver is
placed on the hook and the manual transmission is completed.
The telephone cannot be used while a fax is being sent.
Sending Faxes After Checking to See
whether the Recipient Answers
By pressing the [On Hook] key, you can check to see whether the recipient
answers the call before you send the fax.
1
Load the document into the ADF or place it on the flatbed glass.
2
Press the [On Hook] key, and then type in the fax number of the recipient.
The recipient can be specified in any of the following ways.
–
–
–
–
A one-touch dial key programmed for group dialing cannot be used.
For details on specifying the recipient, refer to "Specifying a Recipient"
on page 25. For details on using the [Redial/Pause] key, refer to
"Sending a Fax Again" on page 29.
28
Direct dialing
Using the one-touch dial key
Using the Speed Dial function
Using the [Redial/Pause] key
Sending Faxes after Using the Telephone