Placing The Original Document On The Flatbed Glass - Konica Minolta PagePro 1390 MF User Manual

2
Put the top end of the document
stack into the ADF input tray
face up and with the first page to
be sent on top of the stack.
3
Adjust the guides to the document size.

Placing the Original Document on the Flatbed Glass

1
Remove all documents from the ADF.
If you are using the flatbed to scan, do not load any documents into
the ADF.
2
Lift open the ADF cover.
3
Place the original document face
down on the flatbed glass and
align its center with the arrow
mark on the glass.
4
Gently close the ADF cover.
Closing it too quickly may cause the document to move on the flatbed
glass.
22
Arrow
mark
Loading Original Documents