Konica Minolta PagePro 1390 MF User Manual page 65

8 Mode
9 Result
10 Job
11 Date
12 Time
13 Type
14 Identification
15 Duration
16 Page
17 Result
Checking the Transmission Result (TX Report)
Shows ECM/resolution/coding/speed (only if the
Speed Display parameter is set to "ON"). If an error
occurred before page transmission, nothing
appears in this field.
If "Photo" was selected, "STANDARD",
"FINE" or "S-FINE" is printed, depending on
the receiver's capabilities.
Shows the transmission results and error codes.
Shows the managing job number used by this
machine.
Shows the date that the fax transmission began.
Shows the time that the fax transmission began.
Shows the type of data that was sent ("Send"
only).
Shows the recipient name or fax number.
Shows the recipient name if one-touch dial keys or
speed dial numbers were used in the transmission.
Shows the fax number if the number was entered
directly or if one-touch dial keys or speed dial num-
bers with no recipient name registered were used.
Shows the length of time of the transmission.
Shows the total number of pages transmitted.
Shows the transmission results and error codes.
59