Konica Minolta Magicolor 2300 DL User Manual page 111

Symptom
You hear
unusual
noises.
The
web-based
utility cannot
be accessed.
Media is
wrinkled.
Solving Other Problems
Cause
The printer is not
level.
The media tray is not
installed correctly.
There is a foreign
object stuck inside
the printer.
The PageScope Light
Admininistrator's
password is incorrect.
The media is moist
from humidity or
having water spilled
on the paper supply.
The transfer roller or
fuser unit may be
defective.
Unsupported media
is being used.
Solution
Put the printer on a flat, hard, level
surface not to exceed ±1° slant in any
direction.
Remove the media tray that you are
printing from and reinsert it completely
into the printer.
Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
The PageScope Light Administrator
password has a 1-character minimum
and a 4-character maximum.
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the
error information. Go to
printer.konicaminolta.net/support or
see the Service & Support Guide for
support telephone numbers.
Use KONICA MINOLTA-approved
media. Refer to "Media Types" on page
12. Check www.konicaminolta.net/
printer/ for currently approved media.
101