Konica Minolta Magicolor 2300 DL User Manual page 122

This message...
PRINTER COVER
OPEN
PUT X IN TRAY Y SIZE Put X (paper or media
PUT X IN TRAY Y
SIZE MISMATCH
SIZE/TYPE ERROR
SIZE/TYPE ERROR
DUPLEX
TONER EMPTY
COLOR
TRAY X EMPTY
TRAY 2
NOT ATTACHED
TRAY 2 LOW
WASTE: NEAR FULL
112
means...
Printer's front door is
open and must be
closed.
type) in Tray Y (Tray 1
or 2 as specified).
Put X (paper or media
type) in Tray Y (Tray 1
or 2 as specified).
The media size set
with the printer driver
is different from the
size of media loaded.
The media size or
type set with the
printer driver is
different from the type
of media loaded into
Tray 1.
The media size or
type set with the
printer driver is
different from the type
being duplexed.
The COLOR (specified
color) toner cartridge
is empty.
Tray X (Tray 1 or 2)
was specified with the
printer driver for
printing, but Tray X is
empty.
Tray 2 was specified
with the printer driver
for printing, but Tray 2
is not attached to the
printer.
Tray 2 is almost out of
media.
The waste toner
bottle is nearly full.
Status, Error, and Service Messages
do this...
Close the front door.
Install the correct media
size or type into the tray
specified.
Install the correct media
type into the tray
specified.
Install the correct media
size.
Install the correct media
size or type.
Use the correct media
size or type when
duplexing.
Replace the toner
cartridge. (Engine/
Replace Toner)
Install media into the
tray specified.
Stop the print job, and
then either change the
printer driver setting or
attach Tray 2 to the
printer.
Prepare more media to
replenish the tray.
Install a new waste toner
bottle.