Service Messages - Konica Minolta Magicolor 2300 DL User Manual

Service Messages

A service message sometimes occurs as a result of an unusual combination
of events, not because of an actual problem. When the printer stops and a
service message displays in the message window, turn the printer off and
then back on. This often clears the service message indicator, and printer
operation resumes. Always try this before making a service call.
Service calls should be placed to the vendor from whom you purchased
the printer. If you cannot get service from your vendor, see the Service &
Support Guide for a list of sources of service and support in the Americas.
The most up-to-date worldwide information can be found at
www.konicaminolta.net/printer/.
This service
message...
ERROR
AIDC SENSOR
ERROR
COMMUNICATION
ERROR
CONTROLLER
ERROR
DIMM
ERROR
RAM
ERROR
ROM
114
means...
AIDC sensor error.
A communication error
occurred in the parallel,
USB or Ethernet
interface.
Controller internal error. Contact Technical
SDRAM DIMM error.
RAM writing/reading
error.
ROM error.
Status, Error, and Service Messages
do this...
Contact Technical
Support with the error
information.
Check that the interface
cable is properly
connected to the printer.
If the error continues to
appear even though the
cables are correctly
connected, contact
Technical Support.
Support with the error
information.
Contact Technical
Support with the error
information.
Contact Technical
Support with the error
information.