Konica Minolta Magicolor 2300 DL User Manual page 113

Symptom
Entire sheet
is printed in
black or
color.
Image is too
light; there is
low image
density.
Image is too
dark.
Solving Problems with Printing Quality
Cause
One or more of the
toner cartridges are
defective.
The OPC drum
cartridge is damaged.
Laser lens cover is
dirty.
The media is moist
from humidity.
There is not much
toner left in the
cartridge.
One or more of the
toner cartridges are
defective.
Media type may be
set incorrectly.
One or more of the
toner cartridges are
defective.
The OPC drum
cartridge is damaged.
Solution
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Engine/Replace Toner menu).
Remove the OPC drum cartridge and
check for damage. If it is damaged,
replace the OPC drum cartridge and
waste toner bottle.
Clean the laser lens cover and perform
an AIDC calibration cycle through the
Engine/Service/Power On Test menu.
Wait until the test is finished and
IDLE/MAGICOLOR 2300DL is
displayed.
Remove the moist media and replace
with new, dry media.
Replace the toner cartridge (Engine/
Replace Toner menu). If the new
cartridge capacity is different, select
the toner cartridge capacity in the
Engine/Change Toner Sz menu.
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Engine/Replace Toner menu).
When printing envelopes, labels,
postcards, thick stock, or
transparencies specify the appropriate
media type in the printer driver.
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Engine/Replace Toner menu).
Remove the OPC drum cartridge and
check for damage. If it is damaged,
replace the OPC drum cartridge and
waste toner bottle.
103