Konica Minolta Magicolor 2300 DL User Manual page 70

10
Support the middle of the cartridge
with your left hand, insert the thumb
and index finger of your right hand into
the two holes in the front of the toner
cartridge, and then insert the cartridge
so that the guides on the cartridge fit
into the rails in the cartridge
compartment in the carousel.
11
Gently push the new toner cartridge
into the printer.
12
Close the printer's front door.
" #
The printer must complete a 150-second calibration cycle after any
consumable has been replaced. If you open the door before the
message window reads
stops and repeats the calibration cycle.
13
If the toner cartridge was checked in step 5 and found to have the
KONICA MINOLTA brand, this completes the replacement procedure.
If a MINOLTA-QMS toner cartridge is being installed, continue with the
following operation to specify the volume of the toner cartridge.
Press Key
60
IDLE/MAGICOLOR 2300DL
(Until) Message Window Reads
IDLE
MAGICOLOR 2300DL
MENU
LANGUAGE
MENU
ENGINE
ENGINE
CHANGE TONER SZ
CHANGE TONER SZ
BLACK
CHANGE TONER SZ
Color
Color
HIGH CAPACITY
Replacing Consumables
, the printer