Konica Minolta Magicolor 2300 DL User Manual page 66

Konica minolta magicolor 2300 dl: users guide
Hide thumbs Also See for Magicolor 2300 DL:
Table of Contents

Advertisement

Keep toner cartridges:
!
In their packaging until you're ready to install them.
!
In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 95° F (35° C) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
!
Level during storage.
Do not stand or store cartridges on their ends or turn them upside down;
the toner inside the cartridges may become caked or unequally
distributed.
!
Away from salty air and corrosive gases such as aerosols.
Steps for Replacing a Toner Cartridge
When the message REPLACE TONER appears
Attention
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If the message "REPLACE TONER" appears for two or more toner
cartridges, we recommend replacing the toner cartridges in the
following order, which also increases the efficiency of the procedure.
(Warm-up time: 2 minutes)
If the toner cartridges are not replaced in the following order, two
minutes for each additional toner color will be added to the warm-up
time. (Warm-up time: Maximum 2 minutes)
(1) Cyan (C) → → → → (2) Black (K) → → → → (3) Yellow (Y) → → → → (4) Magenta (M)
Example 1: If the message "REPLACE TONER" appears for both the
black (K) and cyan (C) toner cartridges, replace the cyan (C) toner
cartridge first. (Warm-up time: 2 minutes)
Example 2: If the message "REPLACE TONER" appears for both the
black (K) and magenta (M) toner cartridges, replace the black (K) toner
cartridge first. (Warm-up time: 2 minutes)
Example 3: If the message "REPLACE TONER" appears for the black
(K), cyan (C) and yellow (Y) toner cartridges, replace the toner
cartridges in the following order: cyan (C), black (K), yellow (Y).
(Warm-up time: 2 minutes)
Example of incorrect procedure: If the message "REPLACE TONER"
appears for the black (K), cyan (C) and yellow (Y) toner cartridges, the
toner cartridges are replaced in the following order: yellow (Y), black
(K), cyan (C). (Warm-up time: 6 minutes)
56
Replacing Consumables

Advertisement

Table of Contents
loading

Table of Contents