Konica Minolta Magicolor 2300 DL User Manual page 115

Symptom
There is
insufficient
fusing or the
image comes
off when
rubbed.
There are
toner
smudges or
residual
images.
Solving Problems with Printing Quality
Cause
The media is moist
from humidity.
Media with
specifications not
covered by the printer
warranty is being
used.
The media type may
be incorrectly set.
One or more of the
toner cartridges are
misinstalled or
defective.
Solution
Remove the moist media and replace it
with new, dry media.
Use media that is covered by the
printer warranty.
When printing envelopes, labels,
postcards, thick stock, or
transparencies the appropriate media
type must be specified in the printer
driver.
If the toner smudges are on only the
front of the page:
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Engine/Replace Toner menu).
105