Location Requirements - Konica Minolta Magicolor 2300 DL User Manual

Location Requirements

!
On a surface capable of supporting the printer, accessories,
consumables, and media.
Component
Printer
Consumables (such as toner
cartridge, OPC drum cartridge)
Media
Lower feeder unit (with tray 2)
Duplex option
With these characteristics...
On a hard, flat, stable, level (±1° or
less slant at any point around the
machine).
Close to an easily accessible
grounded power supply (on an
exclusively dedicated power outlet)
that meets printer specifications.
Near your computer. At the length
6.5' (2 m) or less for an IEEE 1284
bidirectional parallel connection.
With enough space to allow
adequate ventillation and easy
servicing.
With an ambient temperature range
of 50°–95° F (10°–35° C) and
temperature gradient of 50 F°
(10° C) per hour or less.
With relative humidity range of 15%–
85% (noncondensing) and humidity
gradient of 20% per hour or less.
At an altitude of 0–8,202'
(0–2,500m).
" #
A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level. Clear the area of any
obstruction or items such as cables that might prevent the printer
from sitting directly on the flat, level surface.
148
Weight
55 lbs (25 kg)
6.2 lbs (2.8 kg) (total)
5.2 lbs (1.9 kg) per ream of 20 lb
2
bond (75 g/m ) paper
11.24 lbs (5.1 kg)
3.97 lbs (1.8 kg)
But away from...
Direct sunlight. Heating and cooling
sources, extreme temperature or
humidity changes, wind, and dust.
Open flames or items that can easily
burn.
A connection to the same electrical
circuit as high-current machines.
Noise-generating equipment, such
as a copier or air conditioner, and
strong magnetic or electromagnetic
fields, such as a refrigerator.
Water, water pipes, liquid (drink)
containers, and corrosive chemicals
or vapors, such as ammonia.
Small, loose metal parts, such as
paper clips and staples.
Excessive vibration.
Requirements