Table of Contents
Advertisement
Submenu
Setting
Serial Remote
Serial Remote
Selects the using mode.
Off: Disables the serial remote
RS-232C: Controls this unit via RS-
Ethernet: Controls this unit via
Ethernet Setting
Sets the Ethernet.
IP Address: Sets the IP Address.
Subnet Mask: Sets the Subnet Mask.
Default Gateway: Sets "On" or "Off"
Address: Sets the Default Gateway.
Custom Button
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on
the front panel, and can set the
following functions to on or off.
No Setting
Scan Size
Zoom
Flip
POP Sub Screen Position
Gamma
Mono
Phase
Chroma
Brightness
Contrast
Port C Display
Panel Display
Backlight
Adjusts the brightness of the display. A
higher setting increases the brightness
of the display, and a lower setting
darkens the display.
Monitor Information
Software Version
Displays the software version.
Initial Setup menu
The Initial Setup menu is used to make the basic settings
to use the unit.
Submenu
Setting
Language
You can select the menu or message
language from the following languages.
English: English
Italiano: Italian
Español: Spanish
Deutsch: German
Français: French
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while using 2 or 3 screens
display.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
function.
232C command.
Ethernet command.
of the Default Gateway.
: Chinese
: Japanese
Submenu
Setting
PIP / POP
PIP Sub Screen
Sets the sub screen position for the 2 or
Position
3 screen displays (PIP).
Select from among "Lower Left, "
"Upper Left, " "Upper Right, " "Lower
Right. "
POP Sub Screen
Sets the sub screen position for the 2 or
Position
3 screen displays (POP).
Select from among "Left, " "Right. "
PORT A/PORT B
Sets the HD of 1920 × 1080 clipping size
HD Clipping Size
for each port when displaying 2 or 3
screen displays.
Custom Button
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on
the front panel, and can set the
following functions to on or off.
No Setting
Scan Size
Zoom
Flip
POP Sub Screen Position
Gamma
Mono
Phase
Chroma
Brightness
Contrast
Port C Display
Preset menu
The Preset menu is used to set the A to T and user 1 to
20 preset settings.
Submenu
Setting
Load User Setting
Loads the settings that are stored User1
to 20.
Save User Setting
Stores the current settings to User1 to
20.
User Name
Registers the user names to User1 to 20.
Load Default
Loads the default settings.
31
Adjustment Using the Menus
Advertisement
Table of Contents
