Install Fan and Flywheel
WARNING: Damaging Crankshaft and
Flywheel can Cause Personal Injury!
dry and completely free of lubricants. The
to be over stressed and damaged when the
become cracked or damaged if the key is not
properly installed.
not use any type of bar or wedge between the
parts could become cracked or damaged.
is fully seated.
unseat the key.
pins drop into the corresponding recesses.
4. Install the fan mounting plate onto the fan,
aligning the four cutouts, followed by the heavy
Figure 10-50. Installing Fan and Mounting
Hardware to Flywheel.
screw. For an M10 screw, torque to 66.5 N·m
. For an M12 screw, torque to 88.0 N·m
Figure 10-51. Torquing Flywheel.
Section 10
Reassembly
10
10.15