Install Oil Sentry Or Pipe Plug - Kohler Courage SV470 Service Manual

Section 10
Reassembly
Notch
Figure 10-76. Installing Blower Housing Screws.
3. Snap the grass screen onto the cooling fan. See
Figure 10-77. Installing Grass Screen.
Install Oil Sentry™ or Pipe Plug
1. Apply
pipe plug or adapter. Install and tighten into the
pipe plug to 4.5-5.0 N·m (40-45 in. lb.). If a switch
was installed, apply sealant to the threads of the
Oil Sentry™ switch and install into the adapter or
center passage. Torque the switch to 4.5-5.0 N·m
(40-45 in. lb.)
lead to the terminal on the switch. See Figure
10.22
Figure 10-78. Installing Pipe Plug or Adapter.
Figure 10-79. Installed Oil Sentry™ Switch.
® (Loctite ® No.
Center Passage
Oil Sentry™
Switch