控制系统; Wine Guardian Controls - Wine Guardian WG25 Installation, Operation And Maintenance Manual

控制系统

Wine Guardian Controls

本地用户界面将用户设置报给主控制板，
而后者则将警告信号及温湿度读数反馈给
本地用户界面。
Two way communications: local user interface
reports settings back to main control, main
control
energizes outputs and reports alarms and
temp/humidity readings to local user interface.
本地用户界面：配合主控制板进行设定调整、读取温湿度
读数及故障代码等。
Local User Interface: Can be used with Main
Control for adjusting settings, reading
temp/humidity, and reading fault codes at the
unit.
9
主控制板：管理开关功能及输入与输出界面。
主控制板可与本地或远程用户界面以及远程温/
湿度感应器连接。
Main Control: Performs all switching functions and
interfaces with inputs and outputs. It can connect to
local or remote user interface, as well as remote
temperature/humidity sensor.
单向通信：远程温/湿度感应器将温湿度读数报
给主控制板。
One way communication: remote temp/humidity
sensor reports temp and humidity readings to main
control.
双向通信：远程用户界面将用户设置报给主
控制板，而后者则将警告信号及温湿度读数
反馈给远程用户界面
Two way communications: remote user interface
reports settings back to main control, main control
energizes outputs and reports alarms and
temp/humidity readings to remote user interface.
远程用户界面：配合主控制板进行远程设
定调整、读取温湿度读数以及故障代码
等。
Remote User Interface: Can be with Main
Control for adjusting
temp/humidity, and reading fault codes in a
remote location away from the unit.
temperature/humidity sensor.
温/湿度感应器：配合主控制板报告酒窖
内温/湿度，无需在酒窖内安装任何用户
界面。
Temperature/Humidity Sensor: Can be used in
conjunction with the Main Control to report
temp/humidity from inside the wine cellar
without requiring a user interface to be located
inside the wine cellar
settings, reading