Expansion Slots; Lan Wake Up - PCchips M748LMRT Manual

Chapter 2

Expansion Slots

This mainboard has one 32-bit PCI expansion slot and one 8/16-bit
ISA slot. The slots are shared. This means that you can only use
one of the slots at one time.
PCI1
ISA1
Follow the steps below to install a PCI or ISA expansion card.
1. Locate the ISA or PCI slot on the mainboard.
2. Remove the blanking plate from the appropriate expansion slot
on the system chassis.
3. Install the edge connector of the expansion card into the slot
and press it quite firmly down so that it is seated correctly.
4. Secure the bracket of the card into the expansion slot in the
system chassis using the screw that held the blanking plate in
place.

LAN Wake Up

If you are using an ATX power supply you can configure your
system so that it powers down by software and can be resumed by
alarms.
If you have installed a LAN adapter expansion card, connect the
card to the LAN Wake Up header JP8. This allows incoming
traffic to resume the system from a software power down.
26
1
JP8-LAN Wake Up
Header