Expansion Slots - PCchips M787CLR User Manual

Infrared Port
You can connect an infrared port to the mainboard. You can
purchase this option from third-party vendors.
J1-IR Header
VCC 1
NC 2
IRRX 3
GND 4
IRTX 5
1. Locate the infrared port IR header on the mainboard.
2. If you are adding an infrared port, connect the ribbon cable
from the port to the header and then secure the port to an
appropriate place in your system chassis.

Expansion Slots

This mainboard has three 32-bit PCI expansion slots, one AMR
slot and one 8/16-bit ISA slot.
PCI3 PCI1
AMR1
PCI3
PCI2
PCI4
ISA1
Follow the steps below to install a PCI/AMR/ISA expansion card.
1. Locate the AMR, PCI or ISA slots on the mainboard.
2. Remove the slot cover for this slot from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into it so that it is fully inserted.
4. Secure the expansion card bracket to the system chassis using
the screw that held the slot cover in place.
2: Mainboard Installation
15