Table of Contents
Advertisement
Mainboard User's Manual
Onboard LAN LED Connections
If you have a set indicator LEDs for the onboard LAN
communication, you can connect the LED cable to the header J1.
Function
Link LED
ACT LED
Note: 1. The plus sign (+) indicates the pin must be
connected to positive voltage.
2. LAN is an optional feature.
Expansion Slots
This mainboard has three 32-bit PCI slots and one CNR slot.
CNR1
PC3
PC2 PC1
Follow the steps below to install a PCI/CNR expansion card.
1. Locate the PCI or CNR slot on the mainboard.
2. Remove the slot cover from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down until fully inserted.
4. Secure the expansion card bracket in the system chassis with a
screw.
20
Jumper Setting
1, +2
+3, 4
Advertisement
Table of Contents
