Adcm Software; Using The Pci Sound Application - PCchips M748LMRT Manual

This program is available for:
 DOS – D:\PC-CILLIN\DOS\PCSCAN.EXE
 Windows 95 – D:\PC-CILLIN\WIN95\DISK1\SETUP.EXE
 Windows 98 – D:\PC-CILLIN\WIN98\SETUP.EXE

ADCM Software

The AMI Desk-Client Management software provides network
management services.
This software is available for:
Windows 95/98 – D:\AMI ADCM\WIN95&98\SETUP.EXE
Media Ring Talk Software
 D:\Modem\MediaRingTalk\

Using the PCI Sound Application

1. Before you install the PCI Sound drivers, make sure your
Operating System has been installed, otherwise the PCI Sound
might be detected as "Other device" by the device manager of
your OS.
2. After the drivers are properly installed, choose the
MULTIMEDIA icon in the CONTROL PANEL when you
need to use the Software Wave-Table drivers as a MIDI output
device. Select the MIDI page and click on "C-media SoftMidi
Synthesis (Win98) / Driver (Win95)", then click "OK" to
confirm.
3. A Windows application named Audio Rack is provided with
the PCI Sound drivers, which gives you control over all the
audio functions through a user interface that is as simple to use
as a home stereo system. We recommend that you use the
System Mixer in the Audio Rack software to control your
computer's audio volume, recording device and the recording
gain.
4. If the devices that you are using require the MIDI port as the
control interface, you need to select the MULTIMEDIA icon
in the CONTROL PANEL. Select the MIDI page and click on
"CM8738 MPU-401" (Win98) or "CM8738/C3DX PCI Audio
External MIDI Port" (Win95), and then click "OK" to confirm.
The Four Speakers System
41