Table of Contents
Advertisement
Using the Expansion Slots
This mainboard has two 32-bit PCI expansion slots and one TV-Out/LCD
Panel Riser slot.
PCI Slots: The PCI slots can be used to install add-in cards that have
the 32-bit PCI (Peripheral Components Interconnect) interface.
TV-Out/LCD Panel Riser: The TV-Out/LCD Panel Riser slot allows for
the installation of a riser card for exporting the system's video output to
an TV receiver or an external LCD panel.
TV-Out/
LCD
Panel
Riser
1. Before installing an expansion card, check the documentation for the
card carefully. If the card is not Plug and Play, you may have to
manually configure the card before installation.
2. Select which expansion slot you are going to use for your add-in
card.
3. In the system case, remove the blanking plate from the slot in the
system case that corresponds to the expansion slot that you are
going to use.
4. Position the edge connector of the add-in card over the expansion
slot. Position the metal bracket of the card in the empty slot in the
system case.
5. Install the edge connector of the add-in card into the expansion slot.
Press down quite firmly so that you are sure that the edge connector
is correctly seated in the slot.
PCI1
PCI2
29
Advertisement
Table of Contents
