Table of Contents
Advertisement
Chapter 3
Primary Graphics
Use this item to define if your primary graphics
adapter is installed in a PCI slot or on an AGP
Adapter
bus.
PCI VGA Palette
When this item is enabled, multiple VGA
Snoop
devices operating on different buses can handle
data from the CPU on each set of palette
registers on every video device.
Allocate IRQ to
If this item is enabled, an IRQ will be assigned
PCI VGA
to the PCI VGA graphics system. We
recommend that you set this value to No.
DMA Reserved for
If you set it to a DMA, the channel will be
reserved for an installed non-PnP ISA or EISA
ISA
expansion card.
IRQ Reserved for
If you set it to an IRQ, the IRQ line will be
reserved for an installed non-PnP ISA or EISA
ISA
expansion card.
Reserved Memory
This item lets you reserve a block of memory
Size
for any device that requires it.
Reserved Memory
This item lets you set the address for any block
of memory that has been reserved.
Address
Load Optimal Settings
If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
optimal default values. The optimal default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.
Load Best Performance Settings
If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
best-performance default values. The optimal default values are
quite demanding and your system might not function properly if
you are using slower memory chips or other kinds of low-
performance components.
34
Advertisement
Table of Contents
