Install The Processor - PCchips M748LMRT Manual

Install the Processor

This mainboard has a Slot-1 which can be installed with any Slot-1
processor cartridge including the Pentium-III, the Pentium-II, and
the SEPP Celeron. It also has a Socket-370 which can be installed
with the new Celeron processor which is shipped in a PPGA
(Plastic Pin Grid Array) package. To ensure reliability, make
sure that your PPGA Celeron processor is fitted with a
heatsink/cooling fan assembly.
You can install a Slot-1 processor or a PPGA Celeron. You cannot
install a PPGA and a Slot-1 processor cartridge together. Take care
that you do not try to install a Socket-7 processor into the Socket-
370. A Socket-7 processor such as the Pentium-MMX, or the
AMD K5/K6 does not fit in the socket-370. The following table
lists the processors that are currently supported by this mainboard.
New processors may be a released after this manual is printed.
Processor Clock Rate
Cartridge MHz
Pentium-III 550
Pentium-III 500
Pentium-III 450
Pentium-II 450
Pentium-II 400
Pentium-II 350
Pentium-II 333
Pentium-II 300
Pentium-II 266
Pentium-II 233
SEPP Celeron 433
SEPP Celeron 400
SEPP Celeron 366
SEPP Celeron 333
SEPP Celeron 300A
SEPP Celeron 300
SEPP Celeron 266
PPGA Celeron 466
PPGA Celeron 433
PPGA Celeron 400
PPGA Celeron 366
PPGA Celeron 333
PPGA Celeron 300
Install the Processor
Processor System Bus
Socket MHz
Slot-1 100
Slot-1 100
Slot-1 100
Slot-1 100
Slot-1 100
Slot-1 100
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Slot-1 66
Socket-370 66
Socket-370 66
Socket-370 66
Socket-370 66
Socket-370 66
Socket-370 66
9