Running The Setup Utility - PCchips M748LMRT Manual

Chapter 3

Running the Setup Utility

Each time your computer starts, before the operating system is
booted, a message appears on the screen that prompts "Hit <DEL>
if you want to run SETUP". When you see this message, press the
Delete key and the Mainmenu page of the setup utility appears on
your monitor.
You can use the cursor arrow keys to highlight any of the options
on the Mainmenu page. Press Enter to select the highlighted
option. To leave the setup utility, press the Escape key. Hold down
the Shift key and press F2 to cycle through the optional color
schemes of the setup utility.
Some of the options on the Mainmenu page lead to tables of items
with installed values. In these pages, use the cursor arrow keys to
highlight the items, and then use the PgUp and PgDn keys to cycle
through the alternate values for each of the items. Other options on
the Mainmenu page lead to dialog boxes which require you to
answer Yes or No by hitting the Y or N keys.
If you have already made changes to the setup utility, press F10 to
save those changes and exit the utility. Press F5 to reset the
changes to the original values. Press F6 to install the setup utility
28