Optional Extension Brackets; Atx Form Card - PCchips M748LMRT Manual

Chapter 2

Optional Extension Brackets

For this mainboard, you can also obtain an ATX Form Card and an
SPDIF digital audio extension bracket. Install these brackets by
following the steps below.

ATX Form Card

This ATX Form Card provides a mini-DIN PS/2 port for infrared,
one mini-DIN port for a PS/2 mouse. In addition it has two USB
(Universal Serial Bus) ports.
J3-ATX Header
Infrared Port
PS/2 Mouse
Port
USB Ports
ATX Form Card
1. On the mainboard, locate the J3 ATX header for this bracket.
2. Plug the cable from the bracket into the J3 ATX header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Note: If you install an infrared port, it has to share resources with
the fax/modem card. Therefore you cannot use the infrared port
and the fax/modem card at the same time.
22
1