Lan Adapter Extension Bracket; Fax/Modem Daa Module - PCchips M748LMRT Manual

Chapter 2

LAN Adapter Extension Bracket

This bracket supports an RJ45 network connector and connects to
the built in LAN1 header on the mainboard.
LAN Header
LAN Extension
Bracket
1. On the mainboard, locate the LAN1 header for this bracket.
2. Plug the cable from the bracket into the LAN header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.

Fax/modem DAA Module

The fax/modem DAA module plugs directly into the mainboard
adjacent to an expansion slot in the system chassis. When you
remove the blanking plate from the system chassis, you can access
the LINE and TEL RJ11 connectors on the metal edge of the Fax/
modem DAA module.
J1-MODEM Header
GND 1
2 MCLK
GND 3
4 FRA-SY
GND 5
6 SCLK
AUX 3V 7
8 RIN-WAK
HOOK 9
10 GPIO
RIN 11
12 SDO
AUX 5V 13
14 SDI
MUTE 15
16 RST
20
1