Vga Extension Card - PCchips M748LMRT Manual

1. Locate the J1 modem header on the mainboard.
2. Plug the fax/modem DAA module into the J1 modem header.
3. Remove the blanking plate adjacent to the fax/modem DAA
module.
Line & Tel
RJ11 Sockets
Modem Header

VGA Extension Card

The VGA extension card has a 15-pin connector for an external
monitor cable.
1
VGA1-VGA Header
VGA Extension Card
1. On the mainboard, locate the VGA1 header for this bracket.
2. Plug the cable from the bracket into the VGA1 header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Install the Processor
Modem DAA Module
21