Install Memory - PCchips M748LMRT Manual

Chapter 2
4. Match the pin-1 corners and insert the Celeron processor into
the socket. No force is required and the processor should drop
into place freely.
5. Swing the locking lever down and hook it under the catch on
the side of the socket. This locks the Celeron processor in the
socket.
6. Locate the jumper JP7. Use this jumper to select if you have
installed a Slot-1 processor or a Socket-370 processor. The
jumper settings are illustrated below.
Selects a Socket-370
processor
7. If the Celeron processor is installed with a cooling fan
assembly, connect the cable from the fan to the CPU fan power
connector FAN1.

Install Memory

The mainboard has three DIMM slots which can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard. One memory module must be installed
in DIMM1 to provide shared memory for the onboard graphics
system.
12
JP7
1
Selects a Slot-1
processor
1
DIMM1
DIMM2
DIMM3