Chapter 3
Power Management Setup Page
This page sets some of the parameters for the system power
management operation.
Power
Use this item to enable or disable the power
Management/APM
management routines. If you enable the power
management, you can use the items below to
set the power management operation.
Standby Time Out
This sets the timeout for standby mode in
(Minute)
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out
This sets the timeout for suspend mode in
(Minute)
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving suspend mode.
Keyboard Power
Your system can enter a software power down.
On
If you enable this item, you can resume the
system by pressing hot keys on the keyboard.
You must be using an ATX power supply and
enable jumper JP1 in order to use this feature.
32