Expansion Slots - PCchips M758LMT User Manual

Expansion Slots

This mainboard has three 32-bit PCI expansion slots.
PCI1/2/3
Follow these steps below to install a PCI expansion card.
1. Locate the PCI slots on the mainboard.
2. Remove the expansion slot cover from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into until fully inserted.
4. Secure the expansion card bracket to the system chassis with a
screw.
Wake On LAN (WOL)
If you are using an ATX power supply you can configure your
system so that it powers down by software and can be resumed by
alarms. If you have installed a LAN adapter expansion card,
connect the card to the Wake On LAN connector J8. This allows
incoming traffic to resume the system from a software power down.
You need to enable this feature in the system setup utility.
2: Mainboard Installation
J8-WOL
connector
19