Machine Identification; Technical Specifications; Residual Risks; Safety Rules - LAVAZZA BLUE LB2000 Instructions For Installation And Use Manual

1.4 Machine identification
The machine is identified by the name of the model and the serial number
shown on the identification plate.
The plate includes the following information:
• Manufacturer's name
• CE marking
• machine model
• Serial no.
• year of manufacture
• several engineering specifications:
- voltage rating (V).
- frequency rating (Hz).
- electrical input (W).
Note: when submitting any type of request to the Service Provider,
always make reference to this plate and indicate the specific data
shown on it.
1.5 Technical specifications
Voltage rating
See identification plate on the bottom of the appliance
Power rating
See identification plate on the bottom of the appliance
Power supply
See identification plate on the bottom of the appliance
Casing material
Thermoplastic
Size (w x h x d)
327 x 391 x 473 (mm)
Weight
10,5 kg (approx.)
Cord length (mm)
1200
Water tank capacity
4 Litres
Dreg drawer capacity
25 pods
Pod type
Lavazza
Control panel
Front
Weighted sound pressure level A:
Lower than 70dB
Pump pressure
Max 1.5MPA (15.0 bars)
Operating conditions
Minimum temperature: above 10°C
Maximum temperature: below 40°C
Maximum humidity: below 95%
Safety devices
Boiler pressure safety valve
Termostato di sicurezza
Subject to engineering and manufacturing changes as warranted by
technological developments.
Machine in conformity with European Directive 89/336/EEC (Italian Legislative
Decree 476 of 04/12/92) concerning electromagnetic compatibility.
1.6

Residual risks

The dispensing section has no protections to prevent hands from coming into
accidental contact with coffee or hot drinks.
2

SAFETY RULES

Never place live parts in contact with water: danger of short circuit! Hot
water can cause scalding!
Intended use
This coffee machine is designed for use only in small offices and institutions.
Do not make any technical changes or use the machine for purposes other than
those stated since this would create serious hazards!
The machine may be used only by adults in full possession of their physical
and mental capacities.
Power supply
The machine must be connected to mains power supply by the Service provider,
in accordance with the electrical system specifications.
Power cord
Never use the machine if the power cord is defective.
Immediately inform the service provider if the cord and/or plug show to be
defective.
Do not pass the cord around corners, over sharp edges or over hot objects and
keep it away from oil. Do not use the power cord to carry or pull the machine.
Do not pull out the plug by yanking at the power cord or touch it with wet hands.
Do not let the power cord hang freely from tables or shelves.
Protecting others
Make sure that children are not allowed to play with the machine and/or with
packing materials.
Danger of burns
Avoid touching the brew unit.
Space for use and maintenance
The machine must be installed by the service provider in accordance with the
safety regulations in force at the time of installation.
Only the service provider is authorised to move the machine.
Do not use the machine outdoors.
To prevent the casing from melting or being damaged, avoid bringing open
flames and/or very hot objects near the machine.
Do not use in places where the temperature may drop to a level equal to and/or
less than 0°C; if the machine has been exposed to such conditions notify the
service provider, who will have to carry out a safety check.
Cleaning
Before cleaning the machine, it is indispensable to put the main switch OFF (0)
and remove the plug from the socket. Then wait for the machine to cool down.
Never immerse the machine in water! It is strictly forbidden to attempt to access
internal machine parts.
Do not spray water onto the machine to clean it.
Storing the machine
If the machine is to remain out of use for a long time, switch it off and un-
plug it.
Store it in a dry place out of children's reach. Keep it protected from dust and
dirt.
Servicing / Maintenance
In the event of a breakdown, fault or suspected damage after a fall, immediately
unplug the machine and notify the service provider or specialised technician.
Never attempt to operate a faulty machine.
Only the service provider and/or a specialised technician are authorised to
performing servicing and repairs.
• 19 •