Machine Identification Data; Technical Specifications; Overall Dimensions; General Safety Rules - LAVAZZA LB GUZZINI Maintenance Manual For Technical Assistance

1.2.5. Machine identification data

In the plate the following identification data of the
machine are indicated:
- Manufacturer and CE marking;
- model;
- serial number;
- year of manufacture;
- power supply voltage (V) and frequency (Hz);
- power consumption (W).
In case of contact with authorized service centres,
indicate the model and serial number.

1.2.6. Technical specifications

Power supply voltage: 230 V
Frequency: 50 Hz
Power installed: 860 W
Weight: 4 kg

1.2.7. Overall dimensions

Depth: 300 mm
Width: 190 mm
Height: 330 mm
2
Maintenance manual for technical assistance - LB GUZZINI

2. GENERAL SAFETY RULES

Read the entire manual carefully and the follo-
wing general safety rules.
• Power connection should be made in compliance
with local standards in force.
• The electric socket connecting the machine should:
- conform to the type of plug installed on the machine;
- comply with the data provided on the plate placed on
Note
the bottom of the apparatus;
- be connected to ground.
• The electric parts of the machine must not:
- enter into contact with any type of liquid: danger of
electric shock and/or fire;
- be manipulated by humid or wet hands;
- be tampered with.
• It is forbidden:
- To use the machine near flammable substances
and/or explosives and/or in an atmosphere with any
risk of fire;
- To use spare parts not advised by the manufacturer;
- Carry out any type of technical modification not cove-
red in the normal procedures of diagnosis and repair.
• Before carrying out any operation on the machine
ensure that the plug is disconnected from the current
and that the machine has cooled.
• Maintenance operations on the machine should be
carried out by a single person; if a second person
must intervene, this person should be advised of the
potential hazards relevant to the operation underway.
• In case of fire use carbon dioxide (CO2) extingui-
shers. Do not use water or powder extinguishers.
During the repair of the machine all the normal
safety protections, designed to avoid accidents
are disabled. Adopt all the measures necessary
to avoid accidents.
Manual code 10083088 / Rel. 0.00 / January 2008
Attention
Attention